The industry has developed different types of processes to capture, treat, and neutralize the various odors and off-gas air emissions, and the process systems are commonly referred to as “odor control scrubbers”.  Odor control scrubbers come in different types and sizes and allow our industry to operate why we maintain safe working conditions and achieve regulatory compliance.  

Odor control scrubbers are typically vertically packed towers normally. However, some can be shorter and more shaped like a box than a tower, which is used for indoor applications or where height is restricted.  A vertical tower can be manufactured from steel, stainless steel, fiberglass, and PVC.  

When utilizing steel the internals are typically covered by a rubber or epoxy coating and the other material normally requires no internal form of corrosion protection.  With all types and shapes or sizes of scrubbers, there are certain commonalities among all manufacturers. That is the need to interact the contaminated air flow with some treatment process. 

When examining a vertical-type packed odor control scrubber
you will see where the contaminated air enters the tower at the bottom section, typically injected by a mechanical blower or from receiving the contaminated gas stream generated and duct to the tower location.  

The contaminated gas enters the base and travels upwards to the top of the tower.  As the gas travels upward it passes through some type of media bed.  The type of media bed can vary, as can their depth, and the diameter of the bed and the tower also vary dimensionally.  These variables are controlled by the concentration of the contaminated air stream, the required hydraulic load of the airflow, and the recirculating agent utilized in the tower.  

If the odor control scrubber tower is a “chemical type” odor control scrubber
then it will have a re-circulation pump and a chemical feed injection system as part of its components.  The chemical re-circulation system circulates a chemical solution to the top of the tower, where it is evenly injected across the media bed. 

The chemical solution then travels downward by gravity across the media bed to the bottom of the tower, where it collects in the tower sump. Then the re-circulation pump system extracts the chemical solution and recirculates it back up to the tower again.  

This process is continuous, and the chemical re-circulation system is a loop.  As the chemical solution travels downward thru the media bed, it comes into contact with the contaminated airflow as it travels upward.  The air contaminant traveling upward in the Odor Control Scrubber will be removed by either a “reaction’ or an “absorption” process to the specified design conditions or a maximum achievable removal level.  

 Some air contaminants react to chemicals and oxides or convert to other less harmful solutions. In contrast, other types of contaminants are removed by absorbing the contaminant back into the chemical or water solution.  

A similar process is utilized when using a “horizontal” or “cross flow” type chemical odor control scrubber.
The difference between a vertical scrubber and a horizontal cross-flow is that the air travels sideways from one side of the scrubber to the other side before exiting the scrubber.  

The contaminated air still comes into direct contact with the media inside the scrubber and the chemical agents used to treat and neutralize the contaminated air.  The main difference between the two types is height.  The horizontal scrubber is a perfect choice for locations with limited height so long as the concentrations are not too high.  

If the concentration levels are low this can provide a viable solution for an air emission problem.  With a vertical tower if concentrations are higher the tower height is increased to support larger media beds to increase the reaction time.

ODOR CONTROL SCRUBBERS COME IN DIFFERENT TYPES
Industrial chemical odor control scrubbers are one type of odor control scrubber designed to meet specifically to treat the levels of air contaminants? Still, like many types of processes, there are different types and options for treating an air emission or gas odor source.  

These different types of chemical odor control scrubbers include “single-stage,” and two-stage chemical scrubbers also referred to as a “dual pass” chemical odor control scrubbers.  Both of these types of odor control scrubbers utilize chemical reagents or a liquid water re-circulation process to achieve results.  

A very common chemical scrubber is a “hydrogen sulfide (H2S) scrubber” or H2S scrubber and is utilized at industrial and municipal water treatment plants.  Hydrogen sulfide gas is extracted during the water purification process, and the gas is released into the air from a process called “degasification.”  

In water treatment involving reverse osmosis or membrane filtration degasification normally follows post-filtration to remove dissolved gases to enhance the treatment process and raise the pH of the water without additional chemical usage.  The off gases that are removed often contain high levels of hydrogen sulfide (H2S) and carbon dioxide (CO2) and, if left untreated, create a corrosive condition for the surrounding equipment, a noxious odor, and it can create a hazardous condition for workers if levels are above 1 PPM (parts per million).  

The other application you commonly find chemical odor control scrubbers is in the wastewater treatment industry.  When wastewater treatment plants (WWTP) process and break down waste there are gases released during the process and often time because of development growth and the location of the WWTP the off-gases must be captured and treated.  

A normal contaminant of a WWTP is hydrogen sulfide (H2S), similar to a water plant but often at much higher concentrations.  Food processing plants also commonly have hydrogen sulfide and other gas contaminants released during the food processing cycle. 

The semiconductor industry also releases air emission contaminants during the manufacturing process that requires odor control scrubbers to capture and treat the air contaminants to meet regulatory and safe working standards.  These scrubbers can be utilized in a single pass or dual pass to neutralize fumes that are created during the manufacturing process.  

DeLoach Industries manufactures a wide range of industrial chemical scrubbers for the semiconductor and food processing industry.  Some of the chemical scrubbers utilized in the semiconductor industry are referred to as fume scrubbers or acid fume scrubbers.

Biological odor control scrubbers
A biological scrubber utilizes active bacteria colonies cultured to a media bed within the scrubber and acclimated to the specific contaminant, which acts as a food source for the bacteria.  The biological scrubber also has a re-circulation system used for moisture control and to deliver nutrients to the bacteria colony when needed.  The scrubber contains a different type of media bed, typically an organic or porous substance.  

Biological odor control scrubbers operate very well in organic and inorganic gas streams but perform their best when the concentration levels are consistent and gas air stream is not hostile to the bacteria colony.  The pH in the re-circulation system must also be maintained to keep the bacteria colony healthy.  If the concentration levels in the air gas stream spike, then you will have a situation called a “breakthrough,” and untreated gas emissions will leave the scrubber.  

This occurs because the bacteria colony has been cultured and grown specifically to the size of the amount of food source available unless a nutrient feed system is being utilized.  Odor control selection depends on the type of air contaminant you are treating, the concentration of the contaminant, and whether it is an odorous gas needing odor control or a corrosive gas requiring neutralization.

Selecting the right odor control
can be difficult to understand performance versus capital cost versus operating cost versus ease of operation.  Odor control selection is often left up to design professionals who have experience understanding the different variables that must be considered when choosing what type of odor control process to select. 

Most trained design professionals and manufacturers of odor control equipment like DeLoach Industries understand that the capital cost of the equipment is only one part of the equation and often it is the smallest part of the equation.  

Owners who operate in more than one location and have experience with odor control and air emission requirements will recognize the need to evaluate different types of odor control processes and understand the operating cost and requirements of each system evaluated.  

Suppose the wrong kind of odor control scrubber is selected. In that case, it can not only underperform and leave untreated air emissions and odors, but it can also have a high operating cost and require high maintenance levels and media cleaning or replacement.  

A chemical odor control scrubber should “react” and “convert” the contaminants in the air stream or neutralize them to the levels required.  Selecting a single or dual stage is often required if the concentration levels are higher and the conditions require longer residence time within the odor control scrubber.

Make sure you understand the parameters for the odor control scrubber
because if you don’t the consequences can be damaging.  Understanding the dos and don’ts of odor control selection and operations can save you thousands of dollars and protect your system components such as equipment and electronics. 

There are many things that need to be examined when designing a solution for an air emission problem that will require an odor control system or fume scrubber.  It is a good idea to fully understand where the odorous gas comes from and how it is being produced to begin to address the many variables required during the design and selection phase.  

It is also important to understand how the system you select will be operated and in what conditions including the source and type of makeup water you have available for the odor control scrubber.  If your makeup water is too hard, you can create conditions inside the chemical odor control scrubber, such as scaling and fouling of the media bed.  

This can be a very costly mistake and cause countless hours and be very costly to repair and or replace. The makeup water and the re-circulation solution of the scrubber should be maintained and the proper pH and if the hardness levels or Langelier Saturation Index levels are too high then alternate treatment may be required to prevent fouling of the distribution system and of the media bed. 

If utilizing a biological scrubber if the makeup water is not conducive to the bacterial colony, it can kill or reduce the performance within the scrubber.  Many variables should be carefully examined before selecting the type of odor control system and the additional components necessary to operate the system. 

Making your odor control scrubber smart
would be a great way to help operators avoid expensive shutdowns during operations.  If you could imagine that if, during the process of producing food at a food processing plant or a semiconductor manufacturing plant the odor control scrubber or fume control scrubber failed and caused a plant process shutdown, how expensive this could become.  

During the process of making water at either an industrial or a municipal water treatment plant, the failure of an odor control scrubber could shut down the entire water treatment process, leaving the community without water.  

To help avoid costly shutdowns or “breakthroughs” on air emission requirements companies like DeLoach Industries are developing “smart” “industrial water” and  “odor control scrubber” equipment by integrating artificial intelligence” (AI) into the systems that they manufacture.  

By utilizing AI it will soon be possible for an odor control scrubber to “order” its own chemicals when needed, or notify a service repair provider when the operating conditions change, and contact the operator as needed with information.  This will also save the operator valuable time and avoid costly damage from system failures.  

Implementing AI and allowing the equipment to monitor itself beyond normal controls and to work autonomously within the treatment plant will provide higher uptime and reliability, prevent property damage, and help safeguard human life and the environment.  To learn more about the implementation of AI into water, wastewater, and odor control scrubbers.

With today’s demanding industry needs concerning odor emissions and off-gas treatment, our experienced design and manufacturing teams deliver success with the most stringent requirements. For industrial applications, DeLoach Industries has over 50 years of skilled knowledge in supplying our petrochemical customer’s engineered packaged systems to meet their needs in harsh environments.  

We design, manufacture, and ship our systems around the globe. DeLoach Industries offers full design support, installation, startup & training, and long-term operation and maintenance for all of our odor control systems.

To help your company combat odors and reduce air emissions, we specialize in:
⦁ Odor Control scrubbers
⦁ Biological scrubbers
⦁ Chemical scrubbers
⦁ Particulate filtration
⦁ Prepackaged filtration skids
⦁ Custom tank covers
⦁ Fume control
⦁ Dust control
⦁ Portable pilot equipment
⦁ Containerized treatment systems
Hydrogen Sulfide Wet and Dry Scrubbers:
DeLoach Industries offers a complete line of pre-packaged odor control scrubbers for municipal, food, and industrial markets. Our professional design team can incorporate complete package systems into containers or structures to allow local or overseas shipping anywhere in the world.

The systems available range from simple air filtration using HEPA filtration to more complex chemical and biological scrubbers.  Air emission and scrubber treatment systems are available in counter-current flow or horizontal flow configuration, and single systems can achieve flow capacities of up to 70,000 SCFM.

We offer our customers the ability to analyze their off-gas processes with highly trained in-house specialists and engineers. They are skilled in developing and manufacturing air emissions and odor control solutions. DeLoach Industries offers chemical, chlorine, ammonia, caustic, and biological single-stage or dual-stage scrubbers. 

DeLoach also manufactures carbon absorbers and potassium permanganate-type scrubber systems. DeLoach Industries is an innovator in developing new technologies, and we have a complete line of proprietary close-loop odor control scrubbers and low-profile scrubber systems.

Biological Scrubbers:
Using controlled biological activity, we employ biological scrubbers to efficiently remove H2S, VOCs, and other odors from air streams. Designed for high treatment efficiency and maximum corrosion resistance. Biological scrubbing action minimizes chemical consumption and offers low ongoing operational costs. 

All biological scrubbers are designed and sized specifically to our customer’s needs and are fully packaged with full automation components. Systems are available skid mounted or for slab installation. DeLoach Industries offers full installation, startup, and training support. 

DeLoach Industries offers a complete line of pre-packaged odor control scrubbers for municipal and industrial markets. Our professional design team can incorporate complete package systems into containers or structures to allow for overseas shipping around the world. The systems are available in counter-current flow or horizontal flow configuration and can achieve flow capacities of up to 150,000 SCFM.
Products & Services 

Selecting the best odour control systems for your business can be a tough task. There’s a lot to consider: the size of the area you’re working with, the types of problems you need resolved, the impact on staff.

So, what is the best odour control system?
Tough question. It really depends on which industry you are working in. For example: if you’re looking to control odours at a chemical manufacturing plant, you will need a different solution than at a landfill.

Depending on your industry and your needs, some will need permanent solutions, while others only temporary.
A landfill will require a different solution to a construction site
The construction industry, which moves from place to place, would benefit more from temporary odour control equipment. Whereas a landfill – which isn’t going anywhere – needs something permanent.

What do Odour Control Systems do?

• An effective odour control system will neutralise odours in industrial areas such as landfills, waste and water treatment sites, recycling plans and areas where chemicals are being used.
• This is a necessary undertaking, as industrial odours can seriously affect the health, well-being and morale of workers and of the public.
• By neutralising harmful and unpleasant industrial odours, we can create a more hygienic work environment. This will improve the likelihood of a healthier and happier workforce.
• Industrial odours can create a huge problem for people living nearby, therefore it’s best to keep them in check to avoid any unwanted problems.
• Maintaining effective industrial odour control solutions will decrease the chances of your business receiving complaints from local residents. Consequently, these complaints can lead to local government intervention.

Nozzle Systems for Odour Control

• We can install nozzle systems indoors or out. Nozzle systems are adjustable and made to measure. This allows us to ensure the system is pumping a sufficient amount of odour neutralising droplets into the atmosphere.
• The systems are perfect for outdoor boundary control on both landfills and waste treatment plants. The systems come with control panels and filters which we can fit in the most convenient location for you.

Mobile Atomiser Systems for Odour Control

• Mobile atomiser systems are self-contained units. They feature pressure pumps, atomisers, fan casings and electrical controls.

Mobile atomiser odour control system

• Powered by high-quality diesel generators, these units are very mobile, without losing any functionality. The mobile atomiser tank holds 1100 litres, allowing the machine to run from 8-24 hours spraying without refill.
• Indeed, atomiser systems are an excellent way to control industrial odours and are also available as static units. We can fix static atomiser systems to existing building frames to control industrial odours.

Odour Control Solutions

• At ODS, we supply both temporary and permanent odour control solutions. Because of this, our client base spans a range of industries, from construction to quarrying, to recycling and waste management.
• We can advise on the best solution for your particular industry and specific business model. Hence, everyone’s requirements are different, and that’s why our expert team are always on hand to offer innovative and bespoke odour control solutions.

Finally, you can view our other blogs here
Contact us today to enquire about our odour control solutions
Check us out on Facebook but don’t forget to like our page.

Why is Industrial Odour Control Important?

• Industrial odour control is incredibly important. Whether you’re in waste management, recycling, agriculture or the landfill industry, you need to get industrial odours under control.
• Industrial odours are emitted by a number of things. Animals, chemicals, waste and general decay are all leading causes. These come as the result of a variety of differing industrial processes.
• Industrial odour can also vary depending on environment and climate. Hot and humid environments can often exacerbate issues. Windy areas will see odours spread more easily, too.

But what do you know about the negative impacts of industrial odours?

Why is it so important we get industrial odour under control?
Problems that can arise without industrial odour control

• The main reason to get odours under control is the smell. No one wants to be around a bad stink all day long. It’s demoralising and will make people feel sick.
• For your operators, it’s going to be difficult to ensure a happy workforce in such an environment. Attracting new staff or investment won’t be easy either.
• This is not only important to staff and people working around whatever is causing the stench, but also for the general public and local population.
• It can lead to bigger problems than just a few screwed up faces though.
• Modern hydraulic disposer empties a complete trailer, while bulldozer manages landfill.
• If you fail to control the smell being caused by your business, complaints from locals won’t be far away. This could lead to negative media coverage and local government stepping in.
• This could destroy your company’s reputation and result in loss or even closure of business and eventually financial ruin.
• The government is continuously coming down harder and harder on pollution too. Industrial producers of odour are not exempt from these regulations. You could be reprimanded and face fines and other punishments if you do not maintain a healthy and clean workplace.

How can we help fight industrial odour?

• We offer a number of odour control solutions suited to many different industry types. Depending on your needs, we can develop a bespoke solution for you.
• Using state-of-the-art technology we can neutralise odours in industrial areas.
• Our experts can advise you on the best solutions to your problems and provide systems that meet your requirements, while maintaining a fresh and hygienic environment.
• As well as providing nozzle and atomiser systems to spray and neutralise industrial areas, we also supply a unique neutralising agent. This formula is mixed with water and will actively break down odour-causing molecules in the atmosphere.